Lowrance expedition c 操作ガイド

53

character, then press 

→ to move the cursor to the next character and re-

peat until the name is correct, then press 

 to jump to the list below.

3. If you don’t want to spell out the name, you can jump directly to the

 box by pressing 

. Use 

↑ or ↓ to select the waypoint name,

press 

 and the waypoint information screen appears with the 

command selected.

4. To begin navigating to the waypoint, press 

.

Navigate a Trail
1. Press 

|

|

↓ to 

|

 and the following screen ap-

pears.

Trails Menu, Advanced Mode.

2. Press 

↓ to saved trail list, then use ↓ or ↑ to select a trail to navigate.

3. With the trail name highlighted, press 

|

↓

→

to 

|

.

4. Wait while the iFINDER creates a route from the trail.

When the progress message disappears, the unit displays a trail infor-
mation screen, with 

 

 highlighted in the top command box.

Tip: Back Track a Trail

Running the Navigate command will lead you along the trail from
its starting point to its ending point. You can also back track a trail,
following it in reverse. In Easy Mode, this is done automatically
with the most recently created active trail. In Advanced Mode, you
must select the Reverse command to reverse the trail point order
before you start navigating. From the Edit Route menu, press 

→ to

|

|

← to 

.

5. To follow the trail, press 

. The unit begins showing navigation

data along the trail. Follow the steering arrow on the Map Page or the
compass bearing arrow on the Navigation Page.