Lowrance explorer 操作ガイド

82

 

   

Scout Plot menus

3. The Scout menu appears. To make the scout active, highlight 

and press

, then scroll down to 

 and press 

. The Edit

Scout points menu will appear. Select 

 and press 

.

   

   

An active scouting session (center), denoted by the checkbox next to

Active. Scout end selected on Scout menu (center). Add from Map high-

lighted on the Edit Scout points menu (right).

4. As you walk the perimeter of the area you are scouting, you will rec-
ord a series of scouting waypoints that will be used to draw the scout
plot boundary. You need to set enough points to roughly outline the
area's corners. For example, while scouting a square soybean field you
could record the field boundary by setting just four points.

To set the first point, press 

 and the new waypoint menu appears.

Choose a point and press 

. The New Waypoint Name box will ap-

pear with Save Waypoint highlighted. Scroll down to 

 and

press 

 to create your first point. After the point is created, the scout

point menu is cleared. Back on the Map Page, the message Scout 1 ap-
pears in the lower right corner, indicating a scouting session is under
way.

5. Repeat these steps for setting a point at every major corner of the
area you are scouting. The iFINDER will link the flag points and draw
the perimeter of the area you walked.