Lowrance h2o c 操作ガイド

52

method involves searching for POIs with the Find command. (see Sec.
6, Searching, for detailed instructions on POI searches.)

Whenever you locate a POI, the Point of Interest information screen appears
(with phone number, position, etc.) and the 

 command is automatically

highlighted in the command box. To navigate to that POI, press 

 and the

iFINDER begins displaying navigation information to that location.

Navigate to a Waypoint
You can select any waypoint visible on the Map Page with the cursor,
then use the Navigate to Cursor command. You, however, can avoid
scrolling the map to pick your waypoint if you use the Find commands:

1. Press 

|

↓| to 

 and press 

. To look up the nearest

waypoint, press 

, or to look by name (scroll through the entire way-

point list), press 

↓|

. For this example, let’s look by name.

2. If your waypoint list is a long one, you can search for a waypoint by
spelling it out its name in the 

 box. (Press 

↑ or ↓ to change the

first character, then press 

→ to move the cursor to the next character and

repeat until the name is correct, then press 

 to jump to the list below.)

3. If you don’t want to spell out the name, you can jump directly to the

 box by pressing 

. Use 

↑ or ↓ to select the waypoint name,

press 

 and the waypoint information screen appears with the 

command selected.

4. To begin navigating to the waypoint, press 

.

Navigate a Trail
1. Press 

|

|

↓ to 

|

 and the following screen ap-

pears.

Trails Menu, Advanced Mode.

2. Press 

↓ to saved trail list, then use ↓ or ↑ to select a trail to navigate.

3. With the trail name highlighted, press 

|

↓

→

to 

|

.

4. Wait while the iFINDER creates a route from the trail.