Lowrance hunt c 操作ガイド

39

                      

Navigate trail, navigation page (compass rose) views: Driver is east-

bound heading straight toward trail point 5 (left); bearing arrow

shows the trail point is due east (straight ahead.)  Driver has reached

trail point 5 (right) and must turn south to follow the trail. Arrival

alarm goes off and bearing arrow swings around to say turn right

(south), toward the next waypoint, trail point 6. iFINDER now shows

navigation information to point 6, which is 2.07 miles away.

3. When you reach your destination, be sure to cancel your navigation:
press 

|

↓ to 

|

. A message will appear asking

if you want to cancel navigation. Select 

 and press 

.

Clearing or Erasing a Trail
You can erase the current trail and automatically begin recording a
new one by using the Clear Trail command.

WARNING:

Clearing a trail will erase the trail from the iFINDER's memory.
You will not be able to backtrack to that trail if it is erased. If you
need to preserve the trail, switch to Advanced Mode and use the in-
structions in Sec. 4 for Creating and Saving a Trail.

1. Press 

|

↓ to 

|

. A message appears asking if you

want to Clear all trail points. Select 

 and press 

.

2. Return to the page by pressing 

.

Transfer Custom Maps and GPS Data Files

Custom Maps:

Custom maps work only from the MMC card or SD card. When a card
containing a Custom Map File is loaded into the unit, the iFINDER
automatically loads the map into memory when the unit is turned on.