Lowrance m&m ユーザーズマニュアル

50

2. Press 

|

. The waypoint is saved and automatically given a

name with a sequential number, such as "waypoint 001." The waypoint
symbol and number appear on the map.

1. While you are traveling, press 

|

. The waypoint is saved and

automatically given a name with a sequential number, such as "way-
point 002." The waypoint symbol and number appear on the map.

This unit has a man overboard feature that shows navigation data to
the location where the feature was activated. To activate it, press the

 and 

 keys at the same time. Your position at the time these

keys are pressed is used as the man overboard position. The unit auto-
matically begins navigating to the MOB waypoint. For further details,
read the discussion of the Man Overboard feature under the heading
"Navigation" earlier in this section.

This feature sets a waypoint at the current position after taking several
position readings and averaging them. This boosts waypoint position
accuracy by helping to eliminate errors caused by atmospheric condi-
tions and other factors.

1. Press 

|

↓ to 

|

|(cursor jumps to highlight

)|

.

2. Wait while the unit takes points to average for the position. (The greater
the number of points, the greater the accuracy.) When the desired number
of points accumulates, press 

 to create and save the waypoint.

3. The Edit Waypoint menu appears. You can simply save the waypoint
by pressing 

|

 or you can edit the waypoint.

This feature sets a waypoint at a point located a specific distance and
bearing from a reference position. The reference position can be se-
lected from your waypoint list, a map feature or from the Points of In-
terest list.

1. Press 

|

↓ to 

|

|(cursor jumps to highlight

)|

.

2. Press 

↓ to 

|

. Use 

↑ and ↓ to select a waypoint, map

feature or Point of Interest. When the point has been selected, press

 and the point's position appears as the reference position.