Lowrance 250c 補足マニュアル

 1 

™ 250c and Computers 

This instruction sheet supplements your iWAY™ 250c manual. It ex-

plains the proper method for connecting and disconnecting the unit to a 

computer using the USB-to-PC cable. While the iWAY's hard drive con-

tains the mapping data and operating systems, the removable MMC or 

SD card stores the music and photo files. The USB cable will allow you 

to access the memory card for music and photo file transfer. 
Caution: 

The iWAY acts like an additional removable disk drive when connected 
to a computer running the Microsoft

®

 Windows

® 

2000 or Windows

®

 XP 

operating systems. The iWAY is not compatible with earlier Windows 

versions. 
Connecting 

1. Turn on the unit.  
2. Switch the unit's Power Key setting from Standby mode to Power Off 

mode. To change the setting, access the Options menu, select Page 2 

and choose 

. Select 

 from the Power Key menu 

in the bottom right corner of the screen. 
3. Close the menu and return to the map display. 
4. Plug in the USB connector to the USB port on your computer and 

connect the other end of the cable to the iWAY. The computer will rec-

ognize the iWAY and assign it a drive letter. 
If you have an MMC or SD card in the iWAY your computer will read 

the card. If you do not have a card in the iWAY your computer will read 

the iWAY's hard drive. 
You must have a card in the unit to transfer music or photo files be-

cause the files are stored directly on the card. 
Transferring files 
Download music and photo files to the iWAY the same way you would 

normally move or copy files by following your computer's operating sys-

tem instructions.