Lowrance 500c インストール手順
3
The mounting surface should be free of dirt and oil. Remove the socket
arm from the base and make sure the base locking lever is in the off
position. Use both hands and press down hard on the mounting surface.
While maintaining pressure, turn the lock lever to "on" (this will re-
quire some force.)
arm from the base and make sure the base locking lever is in the off
position. Use both hands and press down hard on the mounting surface.
While maintaining pressure, turn the lock lever to "on" (this will re-
quire some force.)
RAM suction cup base on windshield.
Attach the socket arm and quick release plate to the base. Loosen the
socket arm nut so you can position the arm and plate to accept the GPS
receiver, then tighten the nut to hold the arm steady.
socket arm nut so you can position the arm and plate to accept the GPS
receiver, then tighten the nut to hold the arm steady.
Suction mount ready to accept GPS unit.
Mount the unit by snapping the quick release bracket onto the plate. It is
easiest if you engage the bottom of the plate first. (See following photo.)
After the GPS is attached, slightly loosen the socket arm nut and posi-
tion the unit for optimum viewing, then tighten it snugly.
easiest if you engage the bottom of the plate first. (See following photo.)
After the GPS is attached, slightly loosen the socket arm nut and posi-
tion the unit for optimum viewing, then tighten it snugly.
Suction
release
tab
Locking lever in
"On" position.
Press down hard and turn lock.