Lowrance lcx-110c 操作ガイド

65

Depth Range - Manual

You have complete control over the range when the unit is in the
manual mode. There are 16 depth ranges, from 5 to 4,000 feet.

1. First, turn off automatic depth range. From the Sonar Page, press

|

↓

 to 

|

.

2. Press 

↑ to 

|

 and the Depth Range Control Scale appears.

3. Press 

↓ or ↑ to select a different depth range. A horizontal blue bar

highlights the selected range.

4. When the new range is selected, press 

 to clear the menu.

NOTE

The sonar's depth capability depends on the transducer
installation, water and bottom conditions, and other factors.

Depth Range - Upper and Lower Limits

Virtually any segment of the water column can be displayed by using
the upper and lower limit feature. This lets you pick the shallow and
deep range limits shown on the screen, provided there is at least 10 feet
between the upper and lower limit you select. For example, a range
from 12 feet to 34 feet could be used.

Changing the upper and lower limits gives you far greater control over
the depth range. This feature lets you "zoom in" the display in almost
unlimited combinations. Nearly any segment of the water column, from
the surface to the bottom can be shown. This enlarges the sonar targets
to best suit your fishing needs and water conditions.

 

Sonar Page Menu with Upper and Lower Limits command selected

(left); Sonar Chart Limits menu, with Upper Limit selected (right).

To change the upper and lower limits:

1. From the Sonar Page, press 

|

↓

 to 

|

.

The Sonar Chart Limits menu appears, with Upper Limit selected.