Lowrance lcx-112c 操作ガイド
127
2. The Transfer My Data menu includes a message that tells you if a
MMC is present or not. If no MMC is present, you must insert a card
into the unit to activate the Load or Save commands.
into the unit to activate the Load or Save commands.
To transfer data from the unit to the MMC: press
ENT
(for
S
AVE
.)
To transfer data from the MMC to the unit: press
→
to
L
OAD
|
ENT
.
3. Saving to MMC: To accept the default name "Data" for the GPS Data
File, press
File, press
↓ to
S
AVE
D
ATA
|
ENT
. If you wish to rename the file (as shown in
the following figures), press
ENT
to activate the Data File name selection
box. Press
↑ or ↓ to change the first character, then press
→
to the next
character and repeat until the name is correct. Then, press
ENT
|
↓
to
S
AVE
D
ATA
|
ENT
.
The unit will display a completion message when the data transfer is
finished. To return to the Page view, repeatedly press
EXIT
.
From left to right, these figures show the sequence for naming and
saving a GPS Data File from the unit's memory to an MMC.
4.
Loading to unit memory:
There may be more than one GPS Data File
(*.USR) on the card. To select a file, press
ENT
to activate the MMC Card
selection box, use
↓
or
↑
to highlight the file, then press
ENT
. Next, press
↓
to
LOAD
|
ENT.
The unit will display a completion message when the data
transfer is finished. To return to the Page view, press
EXIT
|
EXIT
|
EXIT
.
These figures show the menu sequence for loading a GPS Data File
from an MMC into the unit's memory.
Figure 2.
Figure 1.