Lowrance lcx-112c 操作ガイド
139
Waypoint Position
To edit waypoint position:
1. Press
1. Press
WPT
|
ENT
|
ENT
|
ENT
|
↓ to waypoint name|
ENT
|
↓ to
E
DIT
W
AYPOINT
|
ENT
.
2. Latitude: press
→ to
L
ATITUDE
|
ENT
. Press
↑ or ↓ to change the first character,
then press
→ to the next character and repeat until the latitude is correct. Press
EXIT
.
3. Longitude: press
↓ to
L
ONGITUDE
|
ENT
. Press
↑ or ↓ to change the first
character, then press
→ to the next character and repeat until the longitude is
correct. Press
EXIT
.
4. When latitude and longitude are correct, return to the previous page: press
EXIT
|
EXIT
|
EXIT
|
EXIT
.
Selecting a Waypoint
To select a waypoint on the map (for navigating, editing, etc.,) use the arrow
To select a waypoint on the map (for navigating, editing, etc.,) use the arrow
keys and center the cursor over the waypoint. A highlighted halo will appear
around the waypoint.
Set a Waypoint by Average Position
This feature sets a waypoint at the current position after taking several
position readings and averaging them. This boosts waypoint position accuracy
around the waypoint.
Set a Waypoint by Average Position
This feature sets a waypoint at the current position after taking several
position readings and averaging them. This boosts waypoint position accuracy
by helping to eliminate errors caused by atmospheric conditions and other
factors.
1. Press
1. Press
WPT
|
→ to
S
UBCATEGORY
column|
↓ to
N
EW
|
ENT
.
2. Press
↓ or ↑ to
A
VERAGE
P
OSITION
|
ENT
|press
→ to
C
REATE
|
ENT
.
3. Wait while the unit takes points to average for the position (The greater
the number of points, the greater the accuracy.). When the desired number
of points accumulates, press
of points accumulates, press
ENT
to create and save the waypoint.
4. The Edit Waypoint menu appears. You can simply save the waypoint
by pressing
by pressing
EXIT
|
EXIT
or you can edit the waypoint.
Set a Waypoint by Projecting a Position
This feature sets a waypoint at a point located a specific distance and
bearing from a reference position. The reference position could be a waypoint
This feature sets a waypoint at a point located a specific distance and
bearing from a reference position. The reference position could be a waypoint
map feature, an item from your waypoint list or a location from the Points of
Interest list.
1. Press
1. Press
WPT
|
→ to
S
UBCATEGORY
column|
↓ to
N
EW
|
ENT
.
2. Press
↓ to
P
ROJECTED
P
OSITION
|
ENT
|
→ to
C
REATE
|
ENT
.
3. Press
→ to
C
HOOSE
R
EFERENCE
|
ENT
. Use
↑ and ↓ to select a waypoint, map
feature or Point of Interest. When the point has been selected, press
ENT
and the point's position appears as the reference position.
4. Press
4. Press
↓ to
D
ISTANCE
|
ENT
. Press
↑ or ↓ to change the first character, then press
→ to the next character and repeat until the distance is correct. Press
ENT
.