Lowrance lcx-112c 操作ガイド

 

165

Min/Max setup gives you the option of modifying the gauges minimum 

and maximum angles, values and ticks.  
Minimum and Maximum Angles gives you control over the numerical 

layout of the gauge. You can spread the numbers out around the gauge 
or bunch them together in a smaller area.  
Minimum and Maximum Values allows you to decide where the gauge's 

numbers will begin and where they will top out. For example, you may 

decide to start the gauge at 0, 5 or 10 and top it out at 85, 90 or 100. 
Minimum or Maximum Tick controls how many tick marks will be 

displayed on the gauge. If you set the minimum tick to 1 and the max 
tick to 10, there will be 10 tick marks between 0 and 10, 10 and 20 and 

so on. In the case of a speedometer, that's one tick for one mile per 

hour. If you change the minimum tick to 2 and leave the maximum tick 
at 10, you'll have one tick for every two miles per hour. That's five ticks 

between 0 and 10, 10 and 20 and so on. 
Thresholds setup can be used as a visual aid to mark portions of the 

gauge. It is divided into Upper and Lower Thresholds, each containing 
major (warning) and minor (caution) threshold settings. Two sets of 

numbers must be entered for each threshold. Minor thresholds ranges 

are colored yellow. Major threshold ranges are red.  

 

 

Text setup allows you to choose where the text appears on the gauges. 

There are four options to choose from, above needle, below needle, right 

of needle and left of needle. 
Restore Defaults restores the factory default settings. If you run into 

trouble modifying any of the gauge settings, Default is there to bail you out.