Lowrance lcx-112c 操作ガイド

 

188

The NMEA Diagnostics page displays information about the performance 

of the network bus, keeping you updated on bus status, mode, errors and 
bus traffic.  
The Ethernet Diagnostics page keeps you updated on the performance 

of an Ethernet connection (if applicable) supplying information ranging 
from IP Address to upload and download rates (bytes per second). To 

refresh either Diagnostics page, highlight the 

 button at 

the bottom of the page and press 

. 

The network devices list is located in the top half of the Bus Configuration 

menu. You can configure, calibrate and set alarms for devices accessed from 
the Bus Configuration menu network devices list. 
The Engine-Tank Configuration and Tank Select menus as well as the Tank 

Size dialog box are located on the bottom half of the Bus Configuration 
menu. The Set Configuration button — positioned next to the engine-tank 

configuration menu — allows you to finalize a selected configuration.  
NOTE: 

If you have not used the LMF-200 or LMF-400 to choose an engine-

tank configuration for your vessel, you must use your display unit 

to select a configuration. 

 

The Engine-Tank configuration menu is located below the NMEA 2000 
Devices list, but will only be accessible if a Suzuki engine Interface, EP-

10 Fuel Flow, EP-15 Fluid Level, EP-45 Pressure Sensor or EP-50 

Storage Device are on the network. When choosing an engine-tank 
configuration you will use the Tank Select menu, Tank Size dialog box 

and Set configuration button, all detailed below.