Lowrance lcx-112c 操作ガイド

 

192

1. Press 

|

, select 

 and press 

. 

2. The NMEA 2000 menu will appear with five options: Bus Setup, Fuel 
Management, NMEA 2000 Alarms, Waypoint Sharing and Backlight 

Synchronization. Select 

 and press 

. 

3. Highlight 

 and press 

. The Tank Location menu will 

appear with up to three options: Port, Center and Starboard. 
4. Select the tank you added fuel to and press 

. 

5. Follow the steps below that apply to your tank. 
If you filled up the tank: 
A. Press the 

 button and press 

. The following message will 

appear: Are you sure you wish to Fill Tank? Press 

. Another message will 

appear: Do you wish to re-calibrate the device? Highlight 

 and press 

. 

If you did not fill up the tank: 
B. Highlight 

 and press 

 to access the 

 dialog 

box. Use 

↑ ↓ , ← → to input the amount of fuel added to the tank and 

press 

. Select the 

 button and press 

. The following 

message will appear: Are you sure you wish to Add Fuel? Highlight 

 

and press 

. 

6. Press 

 repeatedly to get back to the main display. 

Engine Operations 
The lower half of the Fuel Management menu contains the following 

Engine Operation functions: Engine Select, Reset Calibration, Reset Trip 
and Reset Seasonal.  

Engine Select allows you to choose the desired engine when resetting 

calibration, resetting trip fuel and resetting seasonal fuel.  

Choosing the Reset Calibration command will switch fuel flow calibration 

settings back to factory defaults.  
1. Press 

|

, select 

 and press 

.  

2. Highlight 

 and press 

. The Fuel Management 

menu will appear.  
3. Highlight to 

 and press 

. Select the desired engine — 

the engine attached to the desired fuel flow — and press 

. 

4. Highlight 

 and press 

. The following confirmation 

message will appear: Are you sure you wish to Reset Calibration? Select 

 and press 

. Calibration settings for the selected fuel have been 

returned to factory defaults.