Lowrance lcx-112c 操作ガイド
82
Gauge Setup Menu.
There are four primary setup options in the analog menu: Themes, Tick
Marks, Thresholds and Text. You can make gauges transparent from
Marks, Thresholds and Text. You can make gauges transparent from
all setup menus except Text Setup.
To change the setup menu, arrow over, highlight one of the four setup
options and press
To change the setup menu, arrow over, highlight one of the four setup
options and press
ENT
. Use
↑ ↓ to select the desired category on the
setup menu, then press
ENT.
To return to the main sonar display, press
ENT
repeatedly.
For advanced information on Overlay Data Style, skip
ahead to 163.
Ping Speed & HyperScroll
™
Ping Speed controls the rate at which the transmitter and transducer
broadcast sonar sound waves — pings — into the water. The unit has a
broadcast sonar sound waves — pings — into the water. The unit has a
default ping speed of 50 percent. At normal boating speeds, this
automatically provides enough return echoes to refresh the screen and
scroll the chart at maximum chart speed.
However, when you are running at high speeds, or just want the fastest
possible screen update, you may want to use the HyperScroll
scroll the chart at maximum chart speed.
However, when you are running at high speeds, or just want the fastest
possible screen update, you may want to use the HyperScroll
™ feature.
When you change the Ping Speed to any setting greater than 50
percent, the unit automatically enters HyperScroll mode.
These faster ping rates allow you to maintain a high-detail picture on
the screen, and the screen refresh rate and chart scroll speed can keep
These faster ping rates allow you to maintain a high-detail picture on
the screen, and the screen refresh rate and chart scroll speed can keep
pace with the boat as it moves quickly over the bottom terrain.
When using HyperScroll, you may also need to manually decrease the
sensitivity for optimum performance. Depending on water depth and
When using HyperScroll, you may also need to manually decrease the
sensitivity for optimum performance. Depending on water depth and
other conditions, HyperScroll may cause a second bottom echo to return
to the transducer during the next ping cycle, or sounding. This can result
to the transducer during the next ping cycle, or sounding. This can result