Lowrance lcx-17m 操作ガイド

66

If you do experiment with chart speed, remember to reset it to
maximum when you resume trolling or moving across the water at
higher speed. To change chart speed:

1. From the Sonar Page, press 

|

↓ to 

|

.

2. The Chart Speed Control Bar appears. Press 

↓ to decrease chart

speed; press 

↑ to increase chart speed.

3. When it's set at the desired level, press 

.

Depth Cursor

The depth cursor consists of a horizontal line with a digital depth box on
the right side. The numbers inside the box show the depth of the cursor.

 

Sonar Page menu with Depth Cursor command selected (left). Sonar

chart with the depth cursor active (right). The line indicates the large

fish is 21.95 feet deep.

The cursor can be moved to any location on the screen, letting you
pinpoint the depth of a target.

1. From the Sonar Page, press 

|

↓ to 

|

.

2. The depth cursor appears. Press 

↓ to lower the cursor line; press ↑ to

raise the cursor line.

3. To clear the depth cursor, press 

.

Depth Range - Automatic

When turned on for the first time, the bottom signal is automatically
placed in the lower half of the screen. This is called Auto Ranging and
is part of the automatic function. You can change the range to a
different depth, depending upon the bottom depth and the current
range. To do this:

1. From the Sonar Page, press 

|

↓ to 

|

.