Lowrance lgc-3000 インストール手順

2 

The LGC-3000 consists of a red male threaded cable connector and the 

GPS module. The GPS module contains a 12-parallel channel GPS+WAAS 

receiver. The cable length from the connector to the GPS module is 18 

inches (45.7 cm). 
The module packs with: a 15 foot (4.6 m) extension cable with a male 

connector on one end and a female connector on the other end; one red 

network T connector; as well as the parts needed for mounting the mod-

ule on a flat surface or the optional pole mount. 
Some packages may include the QM-1 quick mount bracket, which is also 

available as an option. (The QM-1 includes its own instruction sheet, part 

988-0154-502.) The QM-1 is a quick-connecting, bayonet-style mounting de-

vice. It is designed so you can easily mount and dismount any antenna mod-

ule similar to the LGC-3000, LGC-Baja, LGC-2000, LGC-12W or EGC-12W. 
An optional marine pole mount and optional magnet for temporary 

mounting on any ferrous metal surface are also available. For ordering 

information, see the end of this instruction sheet. 

Other supplies are not included, unless otherwise indicated. Recom-

mended tools are pliers and a flathead screwdriver. If you need to route 

the module connector through a bulkhead, you will need a drill and a 

7/8" (22 mm) drill bit. If you are mounting the module directly to a con-

sole or similar surface, you will need a 3/16" (4.75 mm) drill bit for the 

screw holes. 
If you wish to add additional NMEA 2000 sensors or more than one display 

unit, you may need a one-time purchase of a LowranceNET Node Kit.