Lowrance lms-330c 操作ガイド

147

 

 

Menus for changing Com Port settings.

For connectors and wiring information for another device, see page 40.
For assistance in configuring the unit to communicate with another
device, consult the factory; customer service phone numbers are in the
back of this manual. Also see the entry below for Configure NMEA. To
set Com Port Configuration:

1. Press 

|

|

↓ to 

|

.

2. Press 

↓ to 

|

.

Configure NMEA

You can configure the unit to use specific NMEA sentences.

1. Press 

|

|

↓ to 

|

.

2. Press 

↓ to 

|

|

↓ to 

|

.

3. A menu appears showing the prefixes of the available NMEA sen-
tences. A check mark next to a prefix means the prefix is in use. Use 

↑

↓ → ← to select a prefix, then press 

 to turn off the prefix. (Press

 again to check the box and turn a prefix on.)

NOTE:

The names of the NMEA sentences are abbreviated in this menu.
These are the functions of the various selectable prefixes:

•

 

GLL transmits latitude and longitude of present position, time
of position fix, and status.

•

 

RMC and RMB transmits navigation information messages.

•

 

APB transmits autopilot information.