Lowrance lms-330c 操作ガイド

75

To record or log chart data:
1. Press 

|

↓ to 

|

.

2. To record data using the default settings, press 

. The menu clears

and the Sonar Page title bar shows the name of the file you are record-
ing. Warning messages will appear as recording time begins to run out.

NOTE:

You can change any of the settings by using the cursor arrows to
highlight different commands. Select 

 if you want to

change the name. Select 

 if you want to lower the file

quality and record for a longer period of time. After you've changed
the settings, select 

 and press 

.

Noise Rejection

See the entry on Advanced Signal Processing in this section.

Overlay Data

To change the digital data shown "floating" on top of the Sonar Page or
the Map Page:

First, press 

, use 

→ or ← to select a Page Name, then press 

.

1. From the Map or Sonar page, press 

|

↓ to 

|

.

2. Press 

↓ or ↑ to select Data Type|

ENT.

        

Overlay Data command on the Sonar Menu, at left. Overlay Data

Shown selection menu, right. In this example, we scrolled down the

data list to highlight "Ground Speed."