Lowrance lms-332c 操作ガイド
130
Navigate a trail menu sequence: Fig. 1, My Trails command. Fig. 2,
Trails Menu. Fig. 3, Edit Trail Menu. Fig. 4, Edit Route Menu with
Navigate command highlighted for Trail 6. A trail is always converted
to a "route" when you navigate the trail.
On the Map Page, the trail you are navigating is represented by a dot-
ted line that alternates with a flashing solid line. The Navigation Page
will also show the navigated trail as a dotted line. The bearing arrow on
the compass rose points to the next waypoint on the trail.
ted line that alternates with a flashing solid line. The Navigation Page
will also show the navigated trail as a dotted line. The bearing arrow on
the compass rose points to the next waypoint on the trail.
As you travel, the arrival alarm will go off when you near a trail way-
point, and the bearing arrow on the compass rose will swing around
and point to the next trail waypoint. Press
point, and the bearing arrow on the compass rose will swing around
and point to the next trail waypoint. Press
EXIT
to clear the alarm.
Navigate trail, map views: Left, driver is northbound heading straight
toward trail point 6. At right, northbound driver has reached point 6
and has turned west to follow trail.
toward trail point 6. At right, northbound driver has reached point 6
and has turned west to follow trail.
Trail
dotted line
dotted line
Trail point
Present
position
arrow
North
Figure 3.
Figure 4.
Figure 1.
Figure 2.