Lowrance lms-350a 操作ガイド
28
TURN DIGITAL INSTRUMENT BOX OFF
The digital box is displayed in the upper left corner of the full sonar screen.
It has the digital depth and automatic/manual indicators. To turn this box
off, press the MENU key then the key next to the "More" label, then the
key adjacent to the “TURN DIGITAL INSTRUMENT BOX OFF” label.
Repeat the above steps to turn the box on.
The digital box is displayed in the upper left corner of the full sonar screen.
It has the digital depth and automatic/manual indicators. To turn this box
off, press the MENU key then the key next to the "More" label, then the
key adjacent to the “TURN DIGITAL INSTRUMENT BOX OFF” label.
Repeat the above steps to turn the box on.
CONSTRUCT DIGITAL INSTRUMENT BOX
The LMS-350A can display the depth, speed, surface water temperature,
and distance log in the upper left portion of the screen. When the LMS-
350A is first turned on, only the depth is displayed. You can turn each
digital display on as desired or turn all of them off, as desired.
The LMS-350A can display the depth, speed, surface water temperature,
and distance log in the upper left portion of the screen. When the LMS-
350A is first turned on, only the depth is displayed. You can turn each
digital display on as desired or turn all of them off, as desired.
To select the digital displays menu, first press the menu key, then press
the key next to the "More" label. Next, press the key adjacent to the
“CONSTRUCT DIGITAL INSTRUMENT BOX” menu. A screen appears
the key next to the "More" label. Next, press the key adjacent to the
“CONSTRUCT DIGITAL INSTRUMENT BOX” menu. A screen appears
that is similar to the one below.
Now press the key adjacent to
the desired display. For ex-
ample, to turn the temperature
display on, press the key adja-
cent to the “Include Tempera-
ture.” label. Once you do this,
the digital display in the corner
of the screen will show the tem-
perature in addition to the depth.
The temperature menu label now
shows “Remove Temperature”.
the desired display. For ex-
ample, to turn the temperature
display on, press the key adja-
cent to the “Include Tempera-
ture.” label. Once you do this,
the digital display in the corner
of the screen will show the tem-
perature in addition to the depth.
The temperature menu label now
shows “Remove Temperature”.
You can turn each display on or off individually.
Press the CLR key to exit from
this menu or wait approximately
ten seconds and the menus
will automatically clear.
this menu or wait approximately
ten seconds and the menus
will automatically clear.
Remember, to show speed,
temperature, or distance log
you must have an optional
speed/temp sensor installed
and connected to the LMS-
350A.
temperature, or distance log
you must have an optional
speed/temp sensor installed
and connected to the LMS-
350A.