Lowrance lms-350a 操作ガイド

64

cursor position, distance, and
bearing displays at the top of
the screen.

PLOTTING WITH A WAY-
POINT
Using the plotter with a recalled
waypoint or route is an easy
way to see the effects of wind
and current on your boat. It
also simplifies navigation. To
use the plotter in this manner,
first recall a waypoint or start a route. (See the Waypoint Recall section
for more information.) Then press the PLOTTER key. A screen similar to
the one above appears.

The “S” is your starting location. This was your position when you recalled
the waypoint. The flashing circle with a cross is your present position. The
“flag” with a number inside is the destination (recalled waypoint). The
number inside the flag is the recalled waypoint number. In this example,
waypoint number 10 is the destination. The dotted line is the shortest,
most direct course from the starting point to the destination. Follow this
line to get to the waypoint.

The arrival alarm is automatically set to sound a tone when you come
within a preset distance to the destination when you recall a waypoint. See
the section on alarms for more information about the arrival alarm.

PLOTTER MENUS
Pressing the MENU key while the plotter displays gives you a new set of
menus that relate only to the plotter. There are two pages of plotter menus.

CLEAR PLOT
To clear or erase the solid track
line from the screen, use the
"Clear Plot "menu selection.
The plotter will continue to draw
your track after this key is
pressed, starting from your
present position.