Lowrance lms-350a 操作ガイド
68
SELECT UNITS OF
MEASURE
The LMS-350A can display dis-
tance in miles, kilometers, or
nautical miles, velocity in miles
per hour, kilometers per hour,
or knots, bearing in degrees
magnetic or true, altitude in feet
or meters, and time in 12 hour
or 24 hour format.
MEASURE
The LMS-350A can display dis-
tance in miles, kilometers, or
nautical miles, velocity in miles
per hour, kilometers per hour,
or knots, bearing in degrees
magnetic or true, altitude in feet
or meters, and time in 12 hour
or 24 hour format.
To change any these, first
press the MENU key, then
press the key adjacent to the
"More" label. Now press the
key next to the “SELECT
UNITS OF MEASURE” label.
The screen shown at left ap-
pears. The black box on each
line shows the unit of measure
currently in use. In the screen
shown below, the units of mea-
sure are in statute miles for
press the MENU key, then
press the key adjacent to the
"More" label. Now press the
key next to the “SELECT
UNITS OF MEASURE” label.
The screen shown at left ap-
pears. The black box on each
line shows the unit of measure
currently in use. In the screen
shown below, the units of mea-
sure are in statute miles for
distance, miles per hour for velocity, degrees magnetic for bearing,
altitude in feet, and time is in the 12 hour format (a.m./p.m.)
altitude in feet, and time is in the 12 hour format (a.m./p.m.)
Press the key next to the unit that you wish to change. For example, press
the key next to the Distance label twice to switch from miles to kilometers.
This moves the black box two times from the “MI” to the “KM”.
the key next to the Distance label twice to switch from miles to kilometers.
This moves the black box two times from the “MI” to the “KM”.
When you have the units of measure set as desired, press the key next to
the “EXIT” label.
the “EXIT” label.
BACK LIGHT ON/OFF
To turn the back lighting on, press the MENU key, then press the key next
to the "More" label. Now press the key next to the “Backlight On Off” label.
This moves the black box from “OFF” to the “ON” position and turns the
lights on. To turn the backlights off, repeat these steps.
To turn the back lighting on, press the MENU key, then press the key next
to the "More" label. Now press the key next to the “Backlight On Off” label.
This moves the black box from “OFF” to the “ON” position and turns the
lights on. To turn the backlights off, repeat these steps.