Lowrance lms-522c igps 操作ガイド

148 

7. Press 

, which will open the Waypoint Information menu with up 

to four options: Go To Waypoint, Find on Map, Edit Waypoint and De-

lete Waypoint. Select the desired option and press 

. 

Set a Waypoint by Average Position 
This feature sets a waypoint at the current position after taking several 

position readings and averaging them. This boosts waypoint position 

accuracy by helping to eliminate errors caused by atmospheric condi-

tions and other factors. 
1. Press 

|

→ to 

 column|

↓ to 

|

. 

2. Press 

↓ or ↑ to 

|

|press 

→ to 

|

. 

3. Wait while the unit takes points to average for the position. (The 

greater the number of points, the greater the accuracy.) When the desired 

number of points accumulates, press 

 to create and save the waypoint. 

4. The Edit Waypoint menu appears. You can simply save the waypoint 

by pressing 

|

 or you can edit the waypoint. 

Set a Waypoint by Projecting a Position 
This feature sets a waypoint at a point located a specific distance and 

bearing from a reference position. The reference position can be se-

lected from your waypoint list, a map feature or from the Points of In-

terest list. 
1. Press 

|

→ to 

 column|

↓ to 

|

. 

2. Press 

↓ to 

|

|

→ to 

|

. 

3. Press 

→ to 

|

. Use 

↑ and ↓ to select a waypoint, 

map feature or Point of Interest. When the point has been selected, 

press 

 and you will be directed to the Waypoint information menu. 

There will be two options: Set Reference or Find on Map. Highlight Set 

Reference and press Enter. 
4. Press 

↓ to 

|

. Press 

↑ or ↓ to change the first character, 

then press 

→ to the next character and repeat until the distance is cor-

rect. Press 

. 

5. Press 

↓ to 

|

. Press 

↑ or ↓ to change the first character, 

then press 

→ to the next character and repeat until the bearing is cor-

rect. Press 

. 

6. Press 

↑ to 

|

. The Edit Waypoint menu appears. You can 

simply save the new projected waypoint by pressing 

|

 or you 

can edit the waypoint. (Press 

|

 if you want to immediately be-

gin navigating to the new waypoint.)