Lowrance lms-522c igps 操作ガイド

ページ / 252
203 
Section 10: NMEA 2000  
NMEA 2000 Menu 
The NMEA 2000 menu on your display unit's main menu allows you to 
configure, calibrate and monitor devices on a NMEA 2000 network. The 
NMEA 2000 menu provides access to the Bus Setup, Fuel Management 
and NMEA 2000 Alarms. You also can turn on/off Waypoint Sharing 
and Backlight Synchronization from the NMEA 2000 menu. 
NOTE: 
Your internal GPS receiver is a non-network device, so data from 
the receiver CAN NOT be transmitted across a NMEA 2000 net-
work.  
Internal GPS Receiver 
GPS data from your internal GPS receiver can not be transmitted across 
the network to other network devices. The only way to transmit GPS data 
across the network is to add a LGC-2000 or LGC-3000 module to the 
LowranceNET. 
To switch from internal GPS to LGC module 
 Press 
MENU
, select 
NMEA
 
2000
 and press 
ENT
. Choose 
B
USS 
S
ETUP
 and 
press 
ENT
.  
 
 
 
LGC-2000 highlighted on Buss Setup menu (left). LGC-2000 Device 
Configuration menu with the Set Active checkbox selected (center). 
LGC-2000 is now listed as Active on the Buss Setup menu (right). 
1. From the Buss Configuration list, select the LGC module and press 
ENT
2. Press 
↓ to Set Active and press 
ENT
. The LGC module is now the ac-
tive antenna for your unit. The Internal GPS antenna was automati-
cally disabled when the LGC module was set to active.