Lowrance lms-522c igps 操作ガイド

68 

3. Press 

↓ or ↑ to select a different depth range. A horizontal blue bar 

highlights the selected range. 
4. When the new range is selected, press 

 to clear the menu. Repeat 

these steps to turn on Auto Depth Range. 
NOTE: 

The sonar's depth capability depends on the water, bottom condi-

tions, transducer installation and other factors. 

Virtually any segment of the water column can be displayed by using 

the upper and lower limit feature. This lets you pick the shallow and 

deep depth range limits that are shown on the screen, provided there is 

at least 10 feet between the upper and lower limit you select. For ex-

ample, a range from 12 feet to 34 feet could be used. 
Changing the upper and lower limits gives you far greater control over 

the depth range. This feature lets you "zoom in" the display in almost 

unlimited combinations. Nearly any segment of the water column, from 

the surface to the bottom can be shown. 

 

 

To change the upper and lower limits: 
1. From the Sonar Page, press 

|

↓ to 

|

. 

The Sonar Chart Limits menu appears, with Upper Limit selected. 
2. To set the upper limit, press 

. Press 

↑ or ↓ to change the first 

number, then press 

→ to move the cursor to the next number and re-

peat until the depth is correct, then press 

.