Lowrance lms-522c igps 操作ガイド

84 

To change the chart mode color scheme:+ 
1. From the Sonar Page, press 

|

↓ to 

|

. 

2. Press 

↓ to 

|

. 

3. Press 

↓ or ↑ to Mode Name|

. 

4. Press 

|

 to return to the Sonar Page. 

The Pages Menu offers five chart display options for dual-frequency mod-

els and four options for single-frequency models. To access them, press 

|

← or→ to 

|

↓ to Option Name|

. 

 

Full Sonar Chart 
This is the default mode used when the unit is turned on for the first 

time or when it's reset to the factory defaults. 

The bottom signal scrolls across the screen from right to left. Depth 

scales on the right side of the screen aid in determining the depth of 

targets. The line at the top of the screen represents the surface. The 

bottom depth and surface temperature (if equipped with a temperature 

sensor or a transducer with a temp sensor built in) show at the top left 

corner of the screen. 

The FasTrack™ display shows just to the right of the scale. This 

changes all echoes into short horizontal bars, replicating a flasher so-

nar. The zoom bar on the far right shows the area that's zoomed when 

the zoom is in use. (See the Zoom section for more information.)