Lowrance m52 s 操作ガイド

89

You will use the Find Waypoint commands to choose a waypoint you
want to navigate to, or to choose one for editing.

1. Press 

. To look up the nearest waypoint, just press 

ENT, then scroll

down the list to find the desired waypoint;

 or, to look by name, press 

↓ to 

|

. For this example, use 

.

2. If your waypoint list is a long one, you can spell out the waypoint
name in the 

 box to search for it. (Press 

↑ or ↓ to change the

first character, then press 

→ to move the cursor to the next character

and repeat until the name is correct, then press 

 to jump to the list

below.)

3. If the list is short, you can jump directly to the 

 box by

pressing 

. Use 

↑ or ↓ to select the waypoint name, press 

 and

the waypoint information screen appears with the 

 command se-

lected.

4. You can use 

← or → to select various options on the waypoint informa-

tion screen. If you wanted to navigate there, just press 

, since the 

 command is highlighted. If you want to see it on the plotter, press 

→

to 

|ENT.

     

Waypoint information screen on waypoint 004. Screen shows name, lati-

tude/longitude, distance to waypoint and its compass bearing. Figure at

left shows Go To command; right figure shows Find On Plotter command.

5. The M52's plotter appears, with the cross-hair cursor highlighting
the waypoint's symbol. A pop-up name box identifies the waypoint, as
well as its distance and bearing. A data box at the bottom of the screen
continues to display the location's latitude and longitude.