Lowrance x510c ユーザーズマニュアル

ページ / 128
103 
Suzuki Engine Interface Configuration 
To input Device Name: 
1. Press 
MENU| MENU
, use 
↑ ↓ to select 
NMEA
 
2000
 and press 
ENT
. The 
NMEA 2000 menu will appear with five options: Bus Setup, Fuel Man-
agement, NMEA 2000 Alarms, Waypoint Sharing and Backlight Syn-
chronization.  
2. Highlight 
B
US 
S
ETUP
 and press 
ENT
, which will open the Bus Configu-
ration menu. A list of network devices will be at the top of the page.  
3. Use 
↑ ↓  to select the engine interface you want to rename and press 
ENT
. The Device Configuration menu will appear with the Device Name 
dialog box highlighted. 
4. Press 
ENT
 and use 
↑ ↓, ← → to input a name for the interface. Press 
ENT
. Press 
EXIT
 repeatedly to return to the main display. 
To select a Location: 
1. Press 
MENU| MENU
, use 
↑ ↓  to select 
NMEA
 
2000
 and press 
ENT
. The 
NMEA 2000 menu will appear with five options: Bus Setup, Fuel Man-
agement, NMEA 2000 Alarms, Waypoint Sharing and Backlight Syn-
chronization.  
2. Highlight 
B
US 
S
ETUP
 and press 
ENT
,
 
which will open the Bus Configu-
ration menu. A list of network devices will be at the top of the page.  
3. Select the desired engine interface and press 
ENT
. The Device Con-
figuration menu will appear.  
4. Highlight 
L
OCATION
 and press 
ENT
, which will open the Location menu 
with the following options: Port, Center, Starboard and Unknown.  
5. Select the desired location and press 
ENT
. The following confirmation 
message will appear: Are you sure you wish to change this device's con-
figuration?  
6. Press 
ENT
. Press 
EXIT
 repeatedly to get back to the main display. 
To select Engine Type: 
1. Press 
MENU| MENU
, use 
↑ ↓  to select 
NMEA
 
2000
 and press 
ENT
. The 
NMEA 2000 menu will appear with five options: Bus Setup, Fuel Man-
agement, NMEA 2000 Alarms, Waypoint Sharing and Backlight Syn-
chronization.  
2. Highlight 
B
US 
S
ETUP
 and press 
ENT
, which will open the Bus Configu-
ration menu. A list of network devices will be at the top of the page.  
3. Use 
↑ ↓ to select the desired engine interface and press 
ENT
. The De-
vice Configuration menu will appear.  
4. Highlight 
E
NGINE 
T
YPE
 and press 
ENT
, which will open the Engine 
Type menu with the following options: DF40, DF50, DF60, DF70, 
DF90/115, DF140, DF150, DF175, DF200/225, DF250 and DF300.