Interquartz 9310 ユーザーガイド

This INTERQUARTZ telephone is intended for use on 2 wire analogue PSTN and PABX circuits within

Europe.

Interquartz (UK) Limited declares under its sole responsibility that this product

Is in conformity with the following relevant harmonized standards

Electromagnetic Compatibility

EN55022: 1998 & EN55024: 1998

Telecoms

EN301437:1999 & TBR38:1998

Following the provisions of Council Directive on radio equipment and telecommunications terminal equipment

May  2003

1.

The REN number of this telephone is 1.

2.

The European code for emergency services is 112.  You can still use 999 in the UK.  An access code may

be required, if the phone is connected to a PABX.

1.

Insert the line cord into the line socket (refer to Figure 2).

2.

Insert the handset cord into the handset socket.

3.

Set the ringer volume control as desired.

4.

Position the telephone where you want to wall mount.  Drill two holes and fix roundheaded screws,

leaving them slightly proud of the surface.  Position the telephone over the screws and slide downwards

into place.

5.

Before you attempt to change the ER/TBR Recall switch, you should disconnect the phone from the

network.  Contact your PABX Manager or Network Supplier if you need to adjust the Recall switch

(ER/TBR) and Voice Message (S1/S2/N) switch.

A9310-03 3C931001-12B.p65

2003/7/10, ¤W¤È 11:01

1