Sea & Sea gx100 ユーザーズマニュアル
201
7
A
pp
e
e
ndi
c
e
s
The camera has a hot shoe, allowing you
to attach an external flash (available in
stores).
When using an external flash, follow the
steps below.
to attach an external flash (available in
stores).
When using an external flash, follow the
steps below.
1
Close the flash cover. (P.17)
2
With the camera and external
flash powered off, attach the external flash to the hot
shoe.
flash powered off, attach the external flash to the hot
shoe.
3
Turn on the camera, turn the mode dial to A or M, and
set the aperture value. (P.71, P.72)
set the aperture value. (P.71, P.72)
4
Set the ISO sensitivity to a value other than [AUTO].
5
Turn on the external flash, turn its mode to “Auto”, and
set the F-value and ISO sensitivity to the camera-set
values.
set the F-value and ISO sensitivity to the camera-set
values.
• Be sure to turn off the external flash before detaching the external
flash from the camera.
Caution------------------------------------------------------------------------------------------
Camera shake may occur when using slower shutter speeds.
Using the External Flash
X contact