Extreme 10808 インストールガイド

BlackDiamond 8800 Series Switches Hardware Installation Guide

●

Four rack-mount screws appropriate to your organization’s equipment rack

●

Screwdriver appropriate to the rack-mount screws

●

Original packing materials from the chassis

●

Packing tape

●

Nylon strapping and crimping tool

To repack the BlackDiamond 8810 chassis:

Attach the ESD-preventive wrist strap to your bare wrist and connect the metal end to the ground 
receptacle on the chassis front panel.

Remove all modules and power supplies from the chassis. Follow correct Extreme Networks 
procedures for removing components. 

Using four mounting screws, attach the helper bracket to the system rack immediately below the 
chassis.

Remove the eight mounting screws that secure the chassis to the system rack.

On each side of the chassis, place one hand in the empty power supply bay and the other hand in 
the recessed hand-hold on the back panel of the chassis (see 

Slowly guide the chassis out of the system rack using the helper bracket for support.

Carefully lift the chassis off the helper bracket and lower it onto wood pallet (see 

).