Ergodex dx1 ユーザーガイド
55
Troubleshooting
If your DX1 System is not working properly, you can refer to the
status lights on the DX1 Pad to help you diagnose the problem.
status lights on the DX1 Pad to help you diagnose the problem.
Interference
Your DX1 Input System is designed to work in any standard home or
office environment under normal use. However, some conditions
may cause your DX1 Pad to experience interference. If the DX1 Pad
detects a condition that causes interference with its normal
operation, both the Red and Green lights on the Pad will blink
simultaneously (every two seconds, both lights will blink on briefly).
Conditions that may cause your DX1 Pad to report interference
include:
• Placing large metal objects over the Active Surface of the pad.
office environment under normal use. However, some conditions
may cause your DX1 Pad to experience interference. If the DX1 Pad
detects a condition that causes interference with its normal
operation, both the Red and Green lights on the Pad will blink
simultaneously (every two seconds, both lights will blink on briefly).
Conditions that may cause your DX1 Pad to report interference
include:
• Placing large metal objects over the Active Surface of the pad.
• Locating the Pad close to electrical equipment or machinery.
• Pressing and holding more than 10 to 15 DX1 Keys on your Pad
simultaneously. (The Pad will recognize up to six simultaneous
DX1 Key presses.)
DX1 Key presses.)
If your DX1 Pad encounters interference, try to identify and remove
the source or move the Pad to a different location. Once the
interference is removed, the Pad will resume normal operation.
Troubleshooting