Daewoo dvd9000n オーナーマニュアル

•  42 •

If you experience the following problems
while using the unit, this  troubleshooting
guide can help you.

No sound
¥ Check if you press the MUTE.
¥ Check if the unit is properly connected.
¥ Make sure you operate the TV or

amplifier correctly.

¥ Make sure the DVD player or the

amplifier position is properly selected .

¥ Make sure the audio output is set

properly . (Check the audio output mode
of the general setup in Setup menu)

¥ Check whether the disc plays in slow or

fast forward (or reverse) mode.

No image
¥ Check if the unit is properly connected.
¥ Make sure you operate the TV correctly.
¥ Make sure you  set  the colour system

correctly.

Bad sound quality
¥ Make sure  the audio output mode is set

correctly.

¥ Make  sure  the  audio connection

between the unit and amplifier is right.

¥ Check whether the disc is dirty or

damaged.

Image rolls and no colour
¥ The  colour system set by this unit does

not match with  that  of  TV. Press
P/N  on  the  remote  control  to select
the correct one.

¥ Check whether the disc is dirty or

damaged.

Disc can not be played
¥ There is no disc in the unit.
¥ Insert the  disc  on  the disc tray properly

with the label side up.

¥ Clean the disc.
¥ Moisture has condensed in the unit.

Remove  the disc and  leave the unit  on
for about one hour.

¥ Make sure that the area code of disc is 1

or All. (In case of DVD, it may not play
the disk which come from abroad.) 

Remote control does  not work
¥ Remove  barriers  between  the  remote

control and the unit.

¥ Point the remote control at  the  remote

control sensor of the unit.

¥ Replace the batteries with new ones.
¥ Reference page 11.