Intermec 2430 ユーザーガイド

 

 

 

Repeat Steps 7 through 12 to select another application. 

You can also download files used by your application such as an 
employee list or a part number list. 

To download additional files, choose File in the Initialization Data 
box. Type the filename including the backslash. Disable the Binary file 
check box and choose Add. 

Choose OK to save your changes and return to the Terminal Download 
Configuration dialog box. 

In the Terminals and Groups list box, choose the terminal or group 
you configured if it is not already highlighted and marked with an 
asterisk. 

Choose Download. A Download initiated message box appears. 

Choose OK. The executable binary applications and files are 
downloaded to the terminal or group of terminals. If you are 
downloading the applications and files to many terminals or if there is a 
lot of traffic in your RF or Ethernet network, the download may take 
longer. All files are downloaded and stored on the terminal’s flash drive 
C. 

 

Note: If you use terminate-and-stay resident (TSR) programs in your 
DOS application, you also need to download and install the TSR files 
on the terminal. If your application uses a TSR on drive C, transfer the 
TSR to drive C along with the application. If your application uses a 
TSR on drive A, you need to recreate drive A to include the TSR. For 
help, see “Customizing Drive A” on page 322.