Intermec 9710 参照ガイド
IBM PC/XT/AT Series
C d 39
50
IBM PC/XT/AT Series
This section covers these workstations:
• Alfaskop DS/DT*
• NEC 286
• AST 286/386
• Nokia 7414-0011
• AT&T 605
• Nokia ASC/AWS*
• Compaq 286/386
• Nokia Mikro Mikko 3/4*
• HP Vectra ES
• Nokia VDU 192
• IBM 7531
• Tandy 1000
• IBM 7532
• Unisys PW2 286
• IBM AT
• Wang 240
• IBM PC/XT
• Wang 280
• Idea Courier 9292
• Wang 380
*With Nokia AT configured keyboard
Cables
Connecting the reader to one of these workstations requires two cables: a keyboard
cable and a terminal cable. The interface kit contains both the keyboard and terminal
cables. If you need to order a replacement cable, use the part numbers listed below:
cable and a terminal cable. The interface kit contains both the keyboard and terminal
cables. If you need to order a replacement cable, use the part numbers listed below:
• Wedge interface kit (P/N 056944)
• Keyboard cable (P/N 054140)
• Terminal cable (P/N 056311)
• Adapter (P/N 056943)
• Keyboard cable (P/N 054140)
• Terminal cable (P/N 056311)
• Adapter (P/N 056943)
Power Supply
The reader does not require an external power supply to work with the workstation. Set
the PCB jumper to connect pins 1 and 2 on the reader’s rear panel.
the PCB jumper to connect pins 1 and 2 on the reader’s rear panel.