Intermec 9710 参照ガイド
C d 39
AT&T 615 and 65XX Series
1
This reference manual is a collection of all the individual wedge interface reference
(WIF) guides. It lists the part numbers for wedge interface kit, keyboard and terminal
cables, and gives the power supply requirements and bar codes for configuring the
wedge (reader) for a specific terminal. Use this reference manual with a Wedge
Reader User’s Manual for complete instructions on using a reader.
(WIF) guides. It lists the part numbers for wedge interface kit, keyboard and terminal
cables, and gives the power supply requirements and bar codes for configuring the
wedge (reader) for a specific terminal. Use this reference manual with a Wedge
Reader User’s Manual for complete instructions on using a reader.
AT&T 615 and 65XX Series
This section covers these workstations:
• AT&T 615
• AT&T 6538
• AT&T 6518
• AT&T 6539
• AT&T 6528
• AT&T 6578
• AT&T 6529
• AT&T 6579
The individual Wedge Interface Guide corresponding to this section is part number
0542351.
0542351.
Cables
Connecting the reader to one of these workstations requires two cables: a keyboard
cable and a terminal cable. The interface kit contains both the keyboard and terminal
cables. If you need to order a replacement cable, use these part numbers:
cable and a terminal cable. The interface kit contains both the keyboard and terminal
cables. If you need to order a replacement cable, use these part numbers:
• Wedge interface kit (P/N 054230)
• Keyboard cable (P/N 054229)
• Terminal cable (P/N 054228)
• Keyboard cable (P/N 054229)
• Terminal cable (P/N 054228)
Power Supply
The reader does not require an external power supply to work with the workstations. Set
the PCB jumper to connect pins 1 and 2 on the reader’s rear panel.
the PCB jumper to connect pins 1 and 2 on the reader’s rear panel.