Intermec 1545 補足マニュアル

ページ / 8
3
Avertissement:
 Aucune des pièces internes du modèle 1545 ne peut être réparée par l’utilisateur.
L'utilisation d'appareils de contrôle et d'ajustement ainsi que l’exécution de procédures d'utilisation autres
que celles qui sont indiquées dans la présente publication peuvent entraîner une exposition dangereuse à la
lumière laser pouvant atteindre jusqu'à 1,0 mW à 650/670 nm.
Remarque:
 Aucun appareil de contrôle ou d'ajustement n'est fourni pour les opérations de routine ou de
maintenance de l'appareil 1545.
The label shown below is attached to the rear of the 1545 laser scanner:
LASER LIGHT-DO NOT
STARE INTO BEAM
670nm LASER DIODE
1.0 MILLIWATT MAX
CLASS II LASER PRODUCT
C A U T I O N
A T T E N T I O N
PRODUIT LASER CLASSE II
LUMIER LASER - NE PAS
REGARDER DANS LE FAISCEAU
1545S.002
1545 Manual Supplement
(For Users Outside of Canada or the United States)
Place this supplement in your manual.
European Union Compliance
This product complies with EN 55022, EN 50082-1, EN 60950, and EN 60825 as
required by the EMC Directive 89/336/EEC as amended by 92/31/EEC and by the
Low Voltage Directive 73/23/EEC as amended by 93/68/EEC.
TÜV Approval
This product is TÜV GS licensed EN 60950 and EN 60825.
Additional EMI/RFI Compliance
This device meets the Class B limit requirements of CISPR 22.
1545 Laser Compliance and Precaution
The 1545 complies with the following standards for laser safety:
IEC 825 / EN 60825 - Class 2 Laser Product
The 1545 has a maximum output of 1,0 mW at 650/670 nm.
The 1545 is provided with the label illustrated on page 4 of this supplement installed. Page 10 of this
supplement shows a illustration of the additional labels that are provided for user’s not in Canada or the
United States. These labels contain important safety information for the user. If you are not in Canada or the
United States, you MUST locate the sheet of labels that were shipped with your 1545 and replace or cover the
existing label with the appropriate label for your country.