Intermec SR60 参照ガイド
Chapter 3 — Configuring Label Transmit Settings
56
SR60 Scanner Programmer’s Reference Manual
Setting an EOM for a USB Interface
For the USB interface, the global character that is added at the
end of every scan is an End of Message (EOM) character, not a
Postamble (suffix). However, if you use an EOM without a suffix,
the EOM acts as the suffix.
end of every scan is an End of Message (EOM) character, not a
Postamble (suffix). However, if you use an EOM without a suffix,
the EOM acts as the suffix.
The next procedure describes how to set an EOM for a USB
interface. If the EOM you want to set is not in Step 2, set the
EOM to None and set a suffix. For help, see “Setting a Prefix or
Suffix for a USB Interface” on page 54.
interface. If the EOM you want to set is not in Step 2, set the
EOM to None and set a suffix. For help, see “Setting a Prefix or
Suffix for a USB Interface” on page 54.
To set an EOM for a USB interface
1
Scan this bar code.
2
Scan one of these EOM bar codes. The default setting is
Return.
Return.
$
%
/
Start
D
P
5
EOM=Enter
D
P
3
EOM=Field Exit
D
P
6
EOM=CR/LF