IBM m41 ユーザーズマニュアル
3.
To locate the DIMM connectors. See “Identifying parts on the system board” on
page 30 .
page 30 .
4.
Open the retaining clips.
5.
Make sure the notches in the DIMM align with the tabs on the connector. Push
or insert the DIMM straight down into the connector until the retaining clips
close.
or insert the DIMM straight down into the connector until the retaining clips
close.
Notches
What to do next:
v To work with another option, go to the appropriate section.
v To complete the installation, go to “Replacing the cover and connecting the
v To complete the installation, go to “Replacing the cover and connecting the
Installing adapters
This section provides information and instructions for installing and removing
adapters. Your computer has three expansion slots for PCI adapters and one slot
used for an AGP adapter. You can install an adapter up to 340 mm (13.4 inches)
long.
adapters. Your computer has three expansion slots for PCI adapters and one slot
used for an AGP adapter. You can install an adapter up to 340 mm (13.4 inches)
long.
To install an adapter:
1.
1.
Remove the cover. See “Removing the cover” on page 29.
32
User Guide