LiteOn lvw-5001 ユーザーズマニュアル

ページ / 35
18
Recording
DV recording
Before starting to record DV contents
This DVD Recorder allows basic DV control functions with the 
remote control. The DVD Recorder is equipped with a 
camcorder control (Play, Stop, FF or Reverse) feature via the DV 
Link connection. Simply move the screen cursor to the desired 
function and press [ENTER] on DV input screen.
1.Power on your TV and this DVD-Recorder.
2.Place a recordable disc on the tray. Make sure 
the disc’s label is facing up.
3.Connect the DV cable (IEEE-1394 4-pin cable) to 
both the DV Camcorder and the DVD-Recorder.
Note:
1.The DV-Link input jack on this unit is for use with DV compatible 
camcorder only.
2.Only DV signals can be input to the DV-Link jack on this DVD 
Recorder.
3.Do not connect a MICRO MV format video camcorder to this DV-
Link (IEEE-1394)  jack.
4.You cannot connect more than two pieces of video input sources 
at a time to the front panel connector of this DVD-Recorder.
4.Power on the DV Camcorder. Start “Playback 
mode” on the DV Camcorder.
5.“Pause” the DV Camcorder where you want to 
record.
6.Press [ 
 GUIDER] on the remote control. This 
actives the Easy Guider menu.
7. Press [
] [] and to select the “RECORD” 
icon, and press [ENTER] to confirm.
8.Press [
] [] to select “DV” Input, and press 
[ENTER] to confirm.
9.Press [
] [] to select a recording quality and 
press [ENTER] to confirm.
10.Press [ENTER] to start recording.
 Notes:
This DVD-Recorder will stay in “Pause” mode when no DV input 
signal is detected.
11.To pause recording.
Press [ 
 PAUSE ] on the remote control to pause recording .
Press [ 
 PAUSE ] again,  if you want to resume recording.
12.To stop recording.
Press 
 STOP]
Use “Easy Guider” to record DV signal
LVW-5001 model
Before playing a DVD+R disc on compatible equipment, you 
will need to finalize the disc.
LVW-5005XS model
Before playing a DVD+R/DVD-R/DVD-RW disc on compatible 
equipment, you will need to finalize the disc.