JVC gy-hm790 ユーザーズマニュアル
115
Checking the Preset Hue Area
1
Set the [ZEBRA ON/OFF] switch at the front of the
camera recorder to the [SKIN AREA/SPOT METER] end.
Doing so forcibly turns ON the Skin Adjust function
temporarily, and the preset hue area is displayed in color on
the LCD monitor and viewfinder.
temporarily, and the preset hue area is displayed in color on
the LCD monitor and viewfinder.
Memo :
● When [Color Gain] in the [Camera Process] menu is set to
AOffB, only the area where Skin Detail is functioning is
displayed in skin tone. (A Page 83)
displayed in skin tone. (A Page 83)
● When [SKIN A./SPOT M.] of [Switch Set] in the
[Camera Function] menu screen is set to
ASpot MeterB,
the hue area cannot be checked using the
[SKIN AREA/SPOT METER] switch. (A Page 80)
Multi-format color bars can be output on this camera
recorder.
recorder.
Setting
To output color bars, follow the setting procedure below.
1
Set the [FULL AUTO] switch to
AOFFB.
2
Set [Bars] in the [Camera Function] menu to
AOnB.
Color bars are output.
Color Bar Output Using the USER Buttons
1
Set the [FULL AUTO] switch to
AOFFB.
2
Assign
ABarsB to any one of the [USER1]/[USER2]/
[USER3] buttons.
Set using [USER1]/[USER2]/[USER3] of [Switch Set] in the
[Camera Function] menu. (A Page 79)
[Camera Function] menu. (A Page 79)
3
Press the corresponding [USER1]/[USER2]/
[USER3] button that is assigned with
ABarsB.
Color bars are output.
Memo :
● During color bar output, you can select whether to output
the reference audio signals using [Test Tone] in the
[Audio Set] menu. (A Page 77)
[Audio Set] menu. (A Page 77)
● When the [FULL AUTO] switch is set to AONB and [Bars]
in the [FULL AUTO] menu is set to
AOffB, color bars are
not output in the AUX and Media modes.
[ZEBRA ON/OFF]
Switch
Switch
Color Bar Output
[FULL AUTO]
Switch
Switch
[USER1,USER2,USER3]
Buttons
Buttons