JVC gy-hm790 ユーザーズマニュアル

125

This camera recorder is equipped with an AUX input terminal
on the side for recording composite video signals from an
external device to an SDHC card.

Memo :

● [Favorites Menu] does not function in AUX mode.

Set the camera recorder to Camera mode.

Set the [GENLOCK/AUX] switch to

AAUXB.

The [Record Format] menu settings are as follows. (A Page 75)

Set the following items in the [Record Format] menu.

(A Page 75)

● Select the format for recording to the SDHC card in

[File Format] (

AQuickTimeB or AAVIB).

● Set the [Aspect Ratio].

Set [Set Up] in the [A/V Out] menu. (A Page 92)

Input composite video signals from the external

device to the [GENLOCK INPUT] terminal.

Note :

● Input jitter-free composite video signals.

Input level : 1.0 ± 0.3 V (p-p)

Start/Stop recording using the [REC] button on the

camera recorder.

The EE image of the input signal is output in the SD (DV)
format from the respective video output terminals.

Note :

● During recording of external video signals, checking of the

recording (Clip Review) cannot be performed using the
[RET] button on the lens.

● Do not touch the [GENLOCK/AUX] switch while recording

is in progress.

䡵 Status Screen Display in AUX Mode

In the AUX mode,

AAUXB is displayed on the status screens

of the LCD monitor and viewfinder.

Input of Composite Video Signals
from External Device (GY-
HM790CHU/GY-HM790U only)

[System Definition] Item

: SD (DV)

[Camera Resolution] Item

: 720 x 480

[Frame Rate] Item

: 60i

A16:9B : When the input analog signal is a squeeze signal
A4:3B

: All cases other than that stated above

A7.5%B : When input analog signals include setup signals
A0.0%B : When input analog signals do not include setup signals

[GENLOCK/AUX] Switch

[GENLOCK/AUX IN]
Terminal

0 0 : 0 0 : 0 0 : 0 0

STBY

100min
100min

720x480
60i AUX

282min

FREE

123 min

min

720x480
60i AUX

CH1

CH2

STBY

100min

67.8min

AAUXB Display

Status Screen

Enlarged Status Display Screen