JVC gy-hm790 ユーザーズマニュアル

The switch functions of the camera recorder can be 
configured using the remote control unit.

* Remote control units supported : RM-LP25U, RM-LP55U, 

RM-LP57U

Connect the remote cable of the remote control unit to the 
[REMOTE] terminal on the terminal area of the camera 
recorder.

● Turn off the power of the camera recorder when 

connecting a remote control unit.

● For details on functions that can be operated using the 

remote control unit, refer to [List of Remote Control Unit 

䡵 Precautions for Using the Remote 
Control Unit

● When the switches of the camera recorder and remote 

control unit are operated at the same time, the switch 
operation of the remote control unit takes priority over that 
of the camera recorder.

● Focus and zoom operations cannot be performed using 

the remote control unit.

● The shutter speed may vary slightly from the value 

displayed on the camera recorder.

● When the frame rate in [Frame & Bit Rate] of the camera 

recorder is set to 

A24pB, the shutter speed cannot be set 

to 

A1/60B using the remote control unit. Even if the shutter 

speed is set to 

A1/60B, the actual speed is A1/48B. 

● When the camera recorder is in the Media mode, Auto 

White does not function even when it is operated using 
the remote control unit.

● When the H phase is set using a remote control unit, only 

the H phase of the SD signal is activated.

● When setting the H Phase using a remote control unit, 

any value beyond the setting range in the menu of the 
camera recorder cannot be set. (A Page 96)

RM-LP25U

[REMOTE] Terminal