Fujifilm A200 操作ガイド
110
Troubleshooting
Possible causes
Solutions
Nothing happens when I
use the Mode switch.
use the Mode switch.
i Camera malfunction.
i The battery exhausted.
i Briefly remove the batteries or
disconnect the AC power adapter. Then
reload the batteries or reconnect the AC
power adapter and try again.
reload the batteries or reconnect the AC
power adapter and try again.
i Purchase new batteries.
When the camera is
connected to a personal
computer (PC), the shot
image appears on the
camera’s LCD monitor.
connected to a personal
computer (PC), the shot
image appears on the
camera’s LCD monitor.
i The special USB cable is not connected
correctly to the PC or camera.
i The PC is not switched on.
i Set up the camera and USB cable
correctly.
i Switch the PC on.
The camera no longer
works correctly.
works correctly.
i The camera has suffered an unforeseen
problem.
i Remove the batteries briefly and then
reload the batteries and try again.
The ERASE ALL function
does not erase all the
frames.
does not erase all the
frames.
Frame erase does not
erase the frame.
erase the frame.
i Some frames may be.protected.
i Unprotect frames using the camera on
which the protection was first applied.
Troubleshooting
eIf you think the camera is faulty, check the following once more