Revel sub15 ユーザーガイド
Figure 8. The ULTIMA LE-1’s
Remote Control layout.
Remote Control layout.
LE-1 LAYOUTS (Continued)
REMOTE CONTROL LAYOUT
s
FREQ EQ button provides compensation for “room gain.” The
LOW FREQUENCY OPTION LED (on the LE-1’s Front
Panel) illuminates when the effect is on. See Room Gain
Compensation on page 27 for operation details.
LOW FREQUENCY OPTION LED (on the LE-1’s Front
Panel) illuminates when the effect is on. See Room Gain
Compensation on page 27 for operation details.
d
PHASE + and PHASE – buttons provide up to 180° adjust-
ment of LE-1’s phase angle relative to the audio at the input.
The current setting in degrees is indicated on the LED display
(on the LE-1’s Front Panel). See Basic System Optimization and
Optimizing Performance With A Test CD on pages 25 and 26 for
operation details.
ment of LE-1’s phase angle relative to the audio at the input.
The current setting in degrees is indicated on the LED display
(on the LE-1’s Front Panel). See Basic System Optimization and
Optimizing Performance With A Test CD on pages 25 and 26 for
operation details.
f
VOLUME + and VOLUME – buttons provide adjustment of
subwoofer level relative to audio feeding the main loudspeakers.
The current setting in dB is indicated on the LED display (on
the LE-1’s Front Panel). See Basic System Optimization on
page 25 for operation details.
subwoofer level relative to audio feeding the main loudspeakers.
The current setting in dB is indicated on the LED display (on
the LE-1’s Front Panel). See Basic System Optimization on
page 25 for operation details.
g
The battery compartment (on backside) holds two preloaded
AAA batteries for remote control power.
AAA batteries for remote control power.
ULTIMA SUB-15/LE-1
Owner’s Manual
16
Freq Eq
Volume +
Phase -
Phase +
Volume -
s
f
g
d
(on backside)