Revel f30 ユーザーガイド

SYSTEM OPTIMIZATION

1. After connecting the REVEL PERFORMA F30 loudspeakers,

initially set the TWEETER LEVEL CONTROL on both rear
panels to the “0” position, as shown in Figure 12. 

2. Turn on the system power and play a favorite piece of music.

Slowly increase the volume to a comfortable level and listen
from your main listening position. If desired, experiment with
placement (see page 8) to achieve the best overall tonal balance,
image specificity, and spaciousness.

3. You may also wish to further adjust each TWEETER LEVEL

CONTROL. Varying the control will change the high frequency
balance and timbre. Differences in room acoustics often demand
different level control settings.  

CABINET CARE

Each cabinet for the REVEL PERFORMA F30 loudspeaker has a
wood veneer finish and does not require any routine maintenance. 

Occasionally, use a soft cloth, dampened with household furniture
polish, to remove any fingerprints or dust. Clean the grille by gen-
tle vacuuming.

Serial Number
 xxxx

Set Tweeter

Level Control

To “0”