Revel f50 ユーザーガイド
Figure 4. A Revel
Performa F50a loudspeaker with
its inner packing materials.
Performa F50a loudspeaker with
its inner packing materials.
NOTE: While the loudspeaker is upside-down, it is recommended
to adjust the spike footing if the F50a will be placed on a carpeted
floor. Refer to the Adjustable Spike Footing section that begins on
the next page for instructions.
to adjust the spike footing if the F50a will be placed on a carpeted
floor. Refer to the Adjustable Spike Footing section that begins on
the next page for instructions.
5. Grasping the sides of the cabinet, place the F50a on its side.
Then, place the F50a in the upright position without allowing
the protective bag identified in Figure 4 (above) to become
“stuck” under the spike footing.
the protective bag identified in Figure 4 (above) to become
“stuck” under the spike footing.
6. When the F50a is in the upright position, remove the protec-
tive bag.
7. Remove the tweeter dome protector. Then attach the grille to
the cabinet.
8
REVEL PERFORMA F50a
Owner’s Manual
Top Pad
Back Middle Pad
Bottom Pad
Protective Bag
Front
Middle Pad
Middle Pad
Grille