Panasonic HX-A100 ユーザーズマニュアル
17
VQT4X87
Charging and recording time
∫ Charging/Recording time
≥ Temperature: 25 oC (77 oF)/humidity: 60%RH
≥ These times are approximations.
≥ The indicated charging time is for when the battery has been discharged completely. Charging time
≥ The indicated charging time is for when the battery has been discharged completely. Charging time
and recordable time vary depending on the usage conditions such as high/low temperature.
≥ The actual recordable time refers to the recordable time when repeatedly starting/stopping
recording, turning this unit on/off, etc.
≥ The main unit heats up after use or charging. This is not a malfunction.
≥ The power lamp flashes (Flashing with approx. 0.5 second period) when the remaining battery time
≥ The power lamp flashes (Flashing with approx. 0.5 second period) when the remaining battery time
becomes low. The remaining battery capacity is displayed on the screen when using Image App (
l 21).
≥ For information about charging with a mobile USB charger or an AC adaptor, check the support
site.
http://panasonic.jp/support/global/cs/e_cam/index.html (This site is English only.)
http://panasonic.jp/support/global/cs/e_cam/index.html (This site is English only.)
THE FOLLOWING APPLIES ONLY IN THE U.S.A. AND CANADA.
THE FOLLOWING APPLIES ONLY IN LATIN AMERICAN COUNTRIES.
Flashing with approx. 0.5 second period (off for approx. 0.25 second, on for approx. 0.25 second):
≥ Check that the USB terminals of this unit or the connecting device, such as PC are not dirty or covered with a
≥ Check that the USB terminals of this unit or the connecting device, such as PC are not dirty or covered with a
foreign object, and reconnect correctly. If a foreign object or dirt is present, turn off this unit before removing.
≥ The environment is at an extremely high or low temperature. Wait until the temperature has
returned to an appropriate level and try charging again. If you are still unable to charge, there may
be a fault in this unit or the connecting device.
be a fault in this unit or the connecting device.
Flashing with approx. 2 second period (off for approx. 1 second, on for approx. 1 second):
During charging normally (
During charging normally (
l 16)
Flashing with approx. 4 second period (off for approx. 2 seconds, on for approx. 2 seconds):
≥ When the battery is over discharged or the temperature of the battery is too high or low. It can be
≥ When the battery is over discharged or the temperature of the battery is too high or low. It can be
charged, but it may take a few hours to complete the charging normally.
≥ It will flash in approx. 2 second intervals when normal charging resumes. Even in such cases, it may start
flashing in approx. 4 second intervals until charging is completed depending on the conditions of use.
Charging time
Recording mode
Maximum continuous
recordable time
Actual recordable
time
4 h 30 min
1920
k1080/60p
1 h 50 min
55 min
1920
k1080/30p
2 h 20 min
1 h 10 min
1280
k720/60p
2 h 5 min
1 h 5 min
1280
k720/30p
2 h 35 min
1 h 20 min
640
k360/30p
2 h 45 min
1 h 25 min
1920
k1080/60fps
1 h 50 min
55 min
1280
k720/120fps
2 h 5 min
1 h 5 min
640
k360/240fps
2 h 20 min
1 h 10 min
The power plug is the disconnecting device. Install this unit so that the power plug can be
unplugged from the socket outlet immediately.
unplugged from the socket outlet immediately.
The mains plug is the disconnecting device. Install this unit so that the mains plug can be
unplugged from the socket outlet immediately.
unplugged from the socket outlet immediately.
When the Power lamp is flashing during charging
HX-A100_VQT4X87_mst.book 17 ページ ２０１３年１月２５日 金曜日 午前９時５５分