Panasonic AG-HPX370 ユーザーズマニュアル

Chapter

Prepar

ation

When using a V-mount type battery

Mount the V-mount adapter plate. Insert the plate and slide
it as shown below.
• To remove the plate, slide the release lever downwards.

Releaselever

Setting the battery type
• Select the battery type listed under BATTERY SELECT.

Select the menu option BATTERY SELECT from the
setting menu BATTERY SETUP screen.

• When using a battery not listed under BATTERY SELECT:

If it is a NiCd battery, select “NiCd14 (14 V)” and set each
item according to the battery characteristics. If it is not a
NiCd battery, select TYPE A or TYPE B and set each item
according to the battery characteristics. For details, refer
to [BATTERY SETUP screen] (page 144).



NOTE

• For information about the V-mount adapter plate, please

contact the store where you purchased the camera-recorder.

• With the V-mount adapter plate installed, % (percent) values

cannot be displayed when using batteries that show the
remaining battery capacity.

When using an NP battery

MountaV-mountadapterplateonthecamera.

Refer to [When using a V-mount type battery] (this
page).

AttachaholderplateontheNPbatterycase.

• When the battery plate comes with a packing, first

insert the packing in the battery case.

(1) Remove the screw at the bottom of the cover

and remove the cover.

(2) Line up the openings in the battery case and

battery plate and use the supplied screws to
fasten the case to the plate.

(3) Tighten the power supply connector screw.
(4) Insert the removed top cover in the direction of

the arrow.

(5) Line up the openings in the lower cover (metal

part) and the case and use the securing screw
to fasten them together.