Panasonic hd-ag-3dp1 ユーザーズマニュアル

1

Chapter

4

Adjustments

and

Settings

for

Recording

•RECWARNING

This is displayed during a recording error. Do the 
recording over. If this does not solve the problem, 
consult your supplier.
• 

CARDERRL(R)(L/R):

  

This indicates trouble with the P2 card(s) 
inserted into the card slot(s).

•  Turn the power off if the warning continues.
•  If the warning persists after rerecording, replace 

the card with another card.

• 

IRREGULARFRMSIG:

  

The reference signal, such as the GENLOCK 
input, is distorted.

• 

L/RDURATIONNG:

  

The duration of the recorded clip is different 
between the L and R P2 cards.

• 

OVERMAX#CLIPS:

 The limit for the number of clips 

that can be recorded to one P2 card has 
been reached.

• 

PULLDOWNERROR:

 Video pull-down sequence 

error in a mode such as 24P (25P)

• 

RECRAMOVERFLOW:

 Overflow of recording memory

• 

ERROR:

 Other causes

•RUNDOWNCARDL(R)(L/R)

This message indicates that a P2 card has been 
overwritten the maximum number of times and that 
normal recording cannot be guaranteed if operation 
continues.
It is best to replace such P2 cards with a new card.

•SYSTEMERROR

This message indicates that a system error has 
occurred. This type of error can often be corrected by 
turning off the power and turning it back on again.
• 

CAMMICONERROR:

 The microprocessor in the 

camera is not responding.

• 

PCONTROLERROR:

 A P2 control error has 

occurred.

• 

PMICONERROR:

 The P2 microprocessor does not 

respond

• 

PMICONLINKERROR:

 A connection error between 

P2 microprocessors has occurred.

•THUMBNAILOPEN

This message is displayed in the viewfinder during 
thumbnail operations.

•TURNPOWEROFF

This message indicates that an abnormal event has 
occurred, for example, that a card was removed during 
access or that a system mode change was made.
Turn the power off and then turn it back on again.

•WARNING

These messages are displayed when an error related to 
the camera block is detected.
• 

FOCUSNGL(R)(L/R):

 Focus error

• 

ZOOMNGL(R)(L/R):

 Zoom error

• 

IRISNGL(R)(L/R):

 Iris error

• 

NDFILTERNGL(R)(L/R):

 ND filter error

• 

CONV.NGL(R)(L/R):

 Convergence error

• 

SUBLENSNGL(R)(L/R):

 Sub-lens error

•VERSIONMISMATCH
PLEASEUPDATE

This message is displayed if a version mismatch has 
occurred.
Perform card updating.

•WIRELESSRF

This message indicates that reception from the wireless 
receiver is poor.

•ABB

ABB indicator

•AUTOKNEE(ON/OFF)

Displayed when changing the AUTO KNEE switch 
position.

•AWB

AWB indicator

•AWBP3.K/AWBP5.K

Displays the color temperature assigned to PRST when 
the WHITE BAL switch is set to PRST. Also displayed 
when AWB is performed in the PRST position.

•GAIN



dB

Displayed when GAIN is switched.

•SHUTTER



(OFF)

Displayed when the shutter speed is changed.

•3DASSIST

• 

ALERT(ON/OFF):

 Status indication of the 3D ASSIST 

ALERT function

• 

CONV.(ON/OFF):

 Status indication of the 3D ASSIST 

CONV. function

•3DASSISTACTIVE

Displayed when the ZEBRA button is pressed while the 
3D assist function is active.

•3DMODE

• 

NEAR:

 Displayed when the 3D MODE selector switch 

position is changed to NEAR

• 

NORMAL:

 Displayed when the 3D MODE selector 

switch position is changed to NORMAL.

• 

EXTRAZOOM:

 Displayed when the 3D MODE 

selector switch position is changed to EXTRA.